![background image](http://html1.mh-extra.com/html/patton-electronics/model-2604/model-2604_getting-started-manual_4079204034.webp)
3 • Configuring the DACS for operation
Model 2604 E1/T1 DACS Getting Started Guide
34
Initial Configuration through the RS-232 Control Port
Figure 14. Connect To window
3. On the Connect To window (see figure 14), set Connect using: to one of the options named Direct to Com?
(where the question mark (?) refers to the number identifying the RS-232 serial port on the PC). In the
following procedure, Com1 will be the used as the port identifier.
4. Click on
OK
.
5. The COM1 Properties window displays.
6. Configure your COM port settings as shown in figure 15, then click
OK
.
Figure 15. COM1 Properties window