![background image](http://html1.mh-extra.com/html/patton-electronics/model-2604/model-2604_getting-started-manual_4079204047.webp)
Completing the installation
47
Model 2604 E1/T1 DACS Getting Started Guide
3 • Configuring the DACS for operation
Note
If the DACS does not respond as described, the most likely cause is
that the DACS default settings are not compatible with the T1/E1
line. If this is the case, use the RS-232 CONFIG port to correct the
DACS settings. You will have to examine the T1/E1 Link section in
the configuration pages in the DACS.
6. There are two LEDs on the DACS 10/100 Ethernet port: a green LED that indicates link status and activ-
ity, and a yellow LED that indicates line speed.
Verify that the green LED is either flashing green (meaning that packets are being received at the Ethernet
port) or solid green (meaning that the link is valid but no packets are being received).
Congratulations! Your DACS is now installed. For more in-depth information about configuring your DACS
settings, refer to the DACS Administrator’s Reference Guide included on your DACS CD-ROM. Otherwise,
refer to Chapter 4, “Operation and shutdown” for information on activating and de-activating your Model
2604 DACS.