![background image](http://html1.mh-extra.com/html/patton-electronics/model-2604/model-2604_getting-started-manual_4079204058.webp)
5 • Troubleshooting and maintenance
Model 2604 T1/E1 DACS Getting Started Guide
58
Maintenance
2. Connect the RJ45-RJ45 cable between the adapter you installed in step 1 and the RS-232 Config port on
the rear of the DACS.
Setting up the HyperTerminal (or similar program) session
Do the following:
1. Open a HyperTerminal session by double-clicking on HYPERTRM.EXE.
Figure 33. Connection Description window
2. Type a connection name (for example, DACS Config), select an icon, thenclick
OK (see
figure 33
)
.
Figure 34. Connect To window
3. On the Connect To window (see figure 34), set Connect using: to one of the options named Direct to Com?
(where the question mark (?) refers to the number identifying the RS-232 serial port on the PC). In the
following procedure, Com1 will be the used as the port identifier.
4. Click on
OK
.
5. The COM1 Properties window displays.