background image

Table of Contents

1.0

WARRANTY INFORMATION ......................................2
Radio and TV Interference ...........................................2
Service ........................................................................2

2.0

GENERAL INFORMATION..........................................3
Features .......................................................................3
Description ...................................................................3

3.0

INSTALLATION ...........................................................4
Checking the Supplied Parts........................................4
Connecting to the Printer .............................................4
Physical Connection and Operation.............................4
Installing UCONNECT..................................................6
Using PCONSOLE .......................................................7
UCONNECT Commands .............................................9

4.0

NOVELL OPERATION...............................................10
Locating the Print Server on the Novell Network .......10
Configuration using UCONNECT ...............................14
Testing with UCONNECT ...........................................18
Printing within Novell ..................................................19
Upgrading within Novell .............................................19
Troubleshooting within Novell ....................................20

5.0

TCP/IP OPERATION..................................................22
Locating the Print Server on the TCP/IP Network ......22
Configuration within TCP/IP .......................................23
Printing within TCP/IP ................................................25
Upgrading within TCP/IP ............................................27
Troubleshooting within TCP/IP...................................28

APPENDIX A - Specifications...........................................29

APPENDIX B - Interface Connections .............................30

1

1.0  WARRANTY INFORMATION 

Patton Electronics warrants all Model 2126 components to be

free from defects, and will—at our option—repair or replace the product
should it fail within one year from the first date of shipment.

This warranty is limited to defects in workmanship or materials, and

does not cover customer damage, abuse or unauthorized modification.
If this product fails or does not perform as warranted, your sole
recourse shall be repair or replacement as described above.  Under no
condition shall Patton Electronics be liable for any damages incurred
by the use of this product.  These damages include, but are not limited
to, the following:  lost profits, lost savings and incidental or
consequential damages arising from the use of or inability to use this
product.  Patton Electronics specifically disclaims all other warranties,
expressed or implied, and the installation or use of this product shall be
deemed an acceptance of these terms by the user. 

1.1  Radio and TV Interference

The Model 2126 generates and uses radio frequency energy, and if

not installed and used properly—that is, in strict accordance with the
manufacturer's instructions—may cause interference to radio and
television reception.  The Model 2126 has been tested and found to
comply with the limits for a Class A computing device in accordance
with the specifications in Subpart J of Part 15 of FCC rules, which are
designed to provide reasonable protection from such interference in a
commercial installation.  However, there is no guarantee that
interference will not occur in a particular installation.  If the Model 2126
does cause interference to radio or television reception, which can be
determined by disconnecting the Centronics cable or twisted pair cable,
the user is encouraged to try to correct the interference by one or more
of the following measures:  moving the computing equipment away
from the receiver, re-orienting the receiving antenna and/or plugging the
receiving equipment into a different AC outlet (such that the computing
equipment and receiver are on different branches).

1.2  Service

All warranty and non-warranty repairs must be returned freight

prepaid and insured to Patton Electronics.  All returns must have a
Return Materials Authorization number on the outside of the shipping
container.  This number may be obtained from Patton Electronics
Technical Service at (301) 975-1007.  

Packages received without an

RMA number will not be accepted.

Patton Electronics' technical staff is also available to answer any

questions that might arise concerning the installation or use of your
Model 2126.  Hours:  8AM to 5PM EST, Monday through Friday.

2

Summary of Contents for MODEL 2126

















Reviews: