![background image](http://html1.mh-extra.com/html/patton-electronics/iplink-3210-series/iplink-3210-series_getting-started-manual_4070846029.webp)
Planning the installation
29
IPLink 3210 Series Getting Started Guide
2 • Hardware installation
Site log
Patton recommends that you maintain a site log to record all actions relevant to the system, if you do not
already keep such a log. Site log entries should include information such as listed in
table 4
.
Network information
When planning your installation there are certain network-connection considerations that you should take
into account. The following sections describe such considerations for several types of network interfaces.
Network Diagram
Draw a network overview diagram that displays all neighboring IP nodes, connected elements and telephony
components.
IP related information
Before you can set up the basic IP connectivity for your IPLink 3210 Series you should have the
following information:
•
IP addresses and subnet masks used for Ethernet LAN and WAN ports
•
IP addresses and subnet masks used for the V.35 or X.21 serial WAN port
•
IP addresses and subnet masks used for the T1/E1 WAN port
•
IP addresses of central TFTP Server used for configuration upload and download
•
Login and password for PPPoE Access.
Software tools
You will need a PC (or equivalent) with a VT-100 emulation program (e.g. HyperTerminal) to configure the
software on your IPLink VPN Router.
Power source
If you suspect that your AC power is not reliable, for example if room lights flicker often or there is machinery
with large motors nearby, have a qualified professional test the power. Install a power conditioner if necessary.
Table 4. Sample site log entries
Entry
Description
Installation
Make a copy of the installation checklist and insert it into the site log
Upgrades and maintenance
Use the site log to record ongoing maintenance and expansion history
Configuration changes
Record all changes and the reasons for them
Maintenance
Schedules, requirements, and procedures performed
Comments
Notes, and problems
Software
Changes and updates to IPLink software
Summary of Contents for IPLink 3210 Series
