![background image](http://html1.mh-extra.com/html/patton-electronics/iplink-3210-series/iplink-3210-series_getting-started-manual_4070846104.webp)
Introduction
104
IPLink 3210 Series Getting Started Guide
C • Cabling
Introduction
This section provides information on the cables used to connect the IPLink to the existing network infrastruc-
ture and to third party products.
Serial console
The IPLink can be connected to a serial terminal over its serial console port, as depicted in
figure 24
.
Figure 24. Connecting a serial terminal
Note
See section
“Console port, RJ-45, EIA-561 (RS-232)”
on page 108
for console port pin-outs.
The interconnecting cables must be acceptable for external use
and must be rated for the proper application with respect to volt-
age, current, anticipated temperature, flammability, and
mechanical serviceability.
CAUTION
Link
100M
Activity
Enet 0
IPLink VPN
Router
Run
Link
100M
Activity
Enet 1
P
ower
Console
Serial Terminal
Note
A Patton Model 16F-561 RJ45 to DB-9 adapter is included
with each IPLink Series device
Summary of Contents for IPLink 3210 Series
