![background image](http://html1.mh-extra.com/html/patton-electronics/iplink-3210-series/iplink-3210-series_getting-started-manual_4070846108.webp)
Introduction
108
IPLink 3210 Series Getting Started Guide
D • Port pin-outs
Introduction
This section provides pin-out information for the ports of the IPLink router.
Console port, RJ-45, EIA-561 (RS-232)
The RS-232 serial console port of the IPLink is configured to operate as a DCE. View the image in
figure 27
showing the RJ-45 receptacle with the numerical identification of the pin numbers and functions.
Figure 27. EIA-561 (RJ-45 8-pin) port
Refer to
table 17
which tabulates the pin number, signal name and the direction of the signal.
Table 17. RS-232 Console Port
Pin No.
Signal Name
Signal
Direction
1
DSR
from IPLink
2
CD
from IPLink
3
DTR
to IPLink
4
Signal Ground -
5
RD
from IPLink
6
TD
to IPLink
7
CTS
from IPLink
8
RTS
to IPLink
1 2 3 4 5 6 7 8
8–RTS
7–CTS
6–TD
5–RD
4–SG
3–DTR
2–CD
1–DSR
Summary of Contents for IPLink 3210 Series
