Configuring iDSL Ports
112
FS6300 NMS User Manual
7 • Configuring the 3196RC Card
4.
Select an option from the
Test Pattern
drop-down menu. The Test Pattern parameter defines which test
pattern the 3196RC will generate and transmit. The 3196RC will transmit the selected test pattern to the
destination port defined by the option you selected for the Test Mode.
5.
Click
Modify
to save your changes.
View Port Information
Click on
iDSL Port Status and Statistics
in the menu tree of the Port Configuration window to view erros and
up times for the selected port.
Edit CPE Options
Click on
Modify CPE Information
in the menu tree of the Port Configuration window to edit the options for
the CPE, such as the serial rate, DTE test mode, and front panel switches.
To edit the CPE options for a port:
1.
Click on
Modify CPE Options
in the menu tree of the Port Configuration window.
2.
Edit the desired, configurable options:
–
Serial Rate:
Select from the following:
rate19-2k(0) for serial rate of 19200 bps
rate32k(1) for serial rate of 32000 bps
rate56k(1) for serial rate of 56000 bps
rate64k(1) for serial rate of 64000 bps
rate128k(1) for serial rate of 128000 bps
rate144k(1) for serial rate of 144000 bps
–
Front Panel Switches:
Disable or enable front panel switches for the CPE.
–
DTE Test Mode:
Enable or disable the CPE from initiating and responding to test patterns.
–
User ID:
Enter a new User ID for the remote CPE.
3.
Click
Modify
to save your changes.
