EN
144
1
2
3b
2
1
3a
1.
1.
2.
2
1
1
2
1.
2.
1.
2.
2.
GRINDING GUARD
Remove inner
3
and outer flange
4
while pressing spindle lock button
2
.
Attach grinding guard
1
and align it, so
that it protects from sparking.
Caution!
Make sure the tool is
switched off and the battery re-
moved.
1
Close the guard release lever. Securely
tighten the grinding guard
1
with the
wrench and reinstall inner
3
and outer
flange
4
, while pressing the spindle
lock button
2
.
2
STRAIGHT GRINDING WHEEL
Install the grinding wheel with the
larg-
er side
of the outer flange
4
facing the
grinding wheel.
Tighten the outer flange
4
with the
wrench, while pressing the spindle lock
button
2
.
3a
DEPRESSED GRINDING WHEEL
Install the wheel with its raised centre
facing the machine. Install the outer
flange
4
with the
smaller side
facing
the grinding wheel.
Tighten the outer flange
4
with the
wrench, while pressing the spindle lock
button
2
.
3b
ON / OFF
To switch on the tool, press the lower
part of the on / off switch
6
and push
the switch forward. Pressing the top
part of the on / off
6
switch locks it in
on position.
1
To switch off the tool, release the on /
off switch
6
. If the switch is locked,
press the lower part of it to unlock it.
Let the wheel come to standstill with-
out applying pressure to its surface.
AUXILIARY HANDLE
The auxiliary handle
5
can be attached
to the auxiliary handle connector on ei-
ther side of the tool.
Caution!
Make sure the tool is
switched off and the battery re-
moved.
1
Screw the auxiliary handle
5
into the
auxiliary handle connector.
For safe working conditions, make
sure the auxiliary handle is always
mounted to the tool.
2
To release the battery, press the bat-
tery release switch
7
and slide the bat-
tery
9
off the grinder.
2
ATTACH BATTERY
Slide the battery
9
(not included)
onto
the grinder until it clicks into place.
Caution!
Only use the batteries
specified in technical data.
1
Adjustments
2
