background image

1 YEAR  LIMITED WARRANTY

233

1/8" 95° PENCIL

DIE GRINDER

• Astro Pneumatic Tool Co. warrants our products to the original user against defective material or workmanship for a 

period of 1 year from the date of 1st use. Astro reserves the right to determine whether the product failed because of 

defective material, workmanship or other causes and to charge back for missing parts. Astro Pneumatic Tool Co., at its 

discretion, will repair products covered under this warranty free of charge. The original user is to return the product 

(with the exceptions listed below) with the distributor’s name, address, adequate proof of date of purchase or a copy of 

warranty card, and a short note explaining the problem. 

Failures caused by accident, alteration, or misuse are not 

covered by this warranty.

• Astro Pneumatic Tool Co. or its authorized service representatives must perform all warranty repairs. Any repair to the 

product by unauthorized service representatives voids this warranty. The rights under this warranty are limited to the 

original user and may not be transferred to subsequent owners.

• This warranty is in lieu of all other warranties, expressed or implied, including warranties of merchantability and fitness 

for a particular purpose. Some states do not allow the exclusion of limitations of incidental or consequential damages 

so the above limitations may not apply to you.

WARNING

Study, understand and follow all instructions provided with this product. 

Read these instructions carefully before installing, operating, servicing or 

repairing this tool. Keep these instructions in a safe accessible place.

PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING  1-800-221-9705 FOR INSTRUCTIONS

911

Summary of Contents for ONYX 233






Reviews: