Setup
move the light using fine control, instead of full degrees. On color wheels, holding
down shift while rolling the wheel may give you split colors. Similarly, you may
adjust cue times in tenths of a second, instead of full seconds.
When in CONTROL | WHEELS, use Shift
in combination with the ABCD
buttons to quickly set the attribute associated with a particular wheel to its
default value or extents.
NOTE
Holding down SHIFT
and pressing an attribute family shortcut
button like
will move you backwards through the Wheel banks.
Pin Button and Pin Crossfade Timings
Located just below the Cognito badge between the fader banks, the Pin button
provides a simple method of transitioning between lighting looks when in
With a lighting look activated by using the sliders or manual control, press the Pin
button to hold the look (i.e. pin it to the stage). Intensity levels or other attributes
may now be readjusted, without the look onstage being affected. Press the Pin
button again to transition (crossfade) to the newly set look.
To change the Pin crossfade time, press the Shift button
plus the Pin
button. The Edit Pin Crossfade Time box will appear. Touch the keypad icon or
use the B wheel to change the default time. Timing may be changed on the fly
between uses of the Pin button.
NOTE
When in SELECT, if the Pin button is red
moving a slider will change the
cooresponding light's intensity only. If the Pin button is blue
, the slider is
29