Contact Closures
The Contact Closures are enabled on Pro models. The same DB9 port provides
three dry contact interface to trigger Memory bump buttons.
NOTE: You can add up to 16
to any Memory to perform many different
functions from running a cue, disabling outputs to even shutting down the
console. This is the pinout for the three
To assign a Memory to contact closure, go to SETUP |
CONTACT INPUT.
Sliders
Twenty sliders, also called subs, faders or pots, stretch across the top of the
console in two groups of ten.
task, any given slider controls the intensity of the
corresponding light in the Fixture Grid. To do this you must have Sliders Always
Run Memories set to "No" in SETUP | SYSTEM.
22
