Pathway connectivity solutions Cognito 2, User Manual

Page: 33 / 165

Setup
The buttons are backlit when a given function is available, and flash when that
function has been selected.
Release
In SELECT or CONTROL , pressing the Release button progressively reverts
or clears any changes made to the lights, in the following order: revert a selected
light to its last state; clear the selection group; clear all changes made to all lights
since the last Cue or Memory was saved; release all active Cues and memories
(blackout).
In
PLAY , pressing the Release button will ask if you want to release all active Cues
and Memories (blackout). Any lights captured in SELECT will not be released.
IMPORTANT
Always warn everyone present before turning off all lights (black out the stage)
Help
Press the Help button once to launch Hints. The touch screen under Hints is
still active – you can keep Hints up on the screen while programming. Continue
to press the Help button to cycle through the Hints. To dismiss Hints, touch the
Exit icon in the upper right hand corner of the screen, or press and hold Shift
then press the Help button. Press to access the hyperlinked version of
the full manual.
Edit
When in PLAY , press the Edit button to change Cue or Memory names, fade
times and other properties. Copy, deletion or rearrangement of Cues and
Memories is also accessed using Edit. In the Select task, Edit is used to copy
attributes between lights. Edit is not active in the Play | Mixed task, or in Record
task.
27