Assembly
Oil the needle bed well before you
place the lock on it. Use only the
enclosed Bellodoroil.
Drip oil onto the needle feet and the
front and back guide rails
(see illustration).
The curved end of the mast is at the
The tension arms are curved forward,
top and must point to the front.
Fit the mast for the yarn tensioner
into the hole on the row counter.
Fit the tension arms with the yarn
tension dial to the top of the mast.
Before you place the lock onto the
Slide the lock from the right on to the
Your instruction book contains a
needle bed, check that the front dial
needle bed, making sure that the
diagram. Take it out and stick it on to
at the side of the lock is on position I.
guides on the bottom of the lock fit
the front half of the lock.
exactly into the guide rails on the
needle bed.
Now turn the front dial at the side of
the lock to position III.
*
5
