Useful Hints
Cleaning
Never clean the machine while there is a piece of
knitting in it.
Cleaning:
Every time a garment is finished or daily if the machine
is in constant use, proceed as follows:
1. With a soft dry cloth wipe off all surplus oil, or oil that
has become black, from the lock and needle bed.
2. With a dry brush remove remaining yarn fluff from
the needle bed and the interior of the lock.
Special note:
Never use petrol/gasoline on the plastic parts of your
machine. Use soapy water instead.
After cleaning oil again.
Special note
Use only Bellodor oil. Other qualities of oil may contain
ingredients harmful,to the plastic parts of the machine.
Hardgoing Lock
If the lock is harder to move than usual the reason may
be that you have not oiled the machine enough.
Put a few drops of oil on the front and back guide rail
of the needle bed.
Push the needles to Advanced Working Position* * *
and put some oil on the needle feet, after which you
push the lock on position C III several times across the
needles to distribute the oil.
48
t
