Ref.
11/676
PM2092/2-V
PMS2000 System
9
Per gli altri valori, consultare la ‘Tavola di
configurazione’ (pagg. 44/45). Una volta scelto
l’intervallo desiderato, l’amplificatore ripeterà
periodicamente il test. Questo consentirà di
monitorare il funzionamento dell’amplificatore e di
verificare in tempo reale la presenza di guasti o
anomalie della linea.
For the other values, consult the ‘Configuration
Table’ on pages 44/45.
Once the required interval has been chosen, the
amplifier will repeat the test periodically.
This will make it possible to monitor operation of
the amplifier and to check the presence of any
failures or upsets in the line in real time.
LED
Guasto
Trouble
SPK
Il led lampeggia (50%)
Durante il test è stato rilevato un valore
d’impedenza inferiore del 30% di quello
acquisito durante l’installazione.
The LED is flashing (50%)
During the test, an impedance value
30% lower than the one acquired during
installation one is detected.
Il led emette un breve flash ogni 2”
É stato rilevato ed isolato un guasto sulla
linea SPEAKER LINE ‘A’.
The LED flashes briefly every 2”
failure has been detected and isolated on
the SPEAKER LINE ‘A’.
Il led emette due brevi flash ogni 2”
É stato rilevato ed isolato un guasto sulla
linea SPEAKER LINE ‘B’.
The LED flashes briefly twice every 2”
failure has been detected and isolated on
the SPEAKER LINE ‘B’.
Il led emette tre brevi flash ogni 2”
É stato rilevato ed isolato un guasto su
entrambe le linee.
The LED flashes three times every 2”
Failures have been detected and isolated
on both lines.
Il led è acceso (fisso)
Durante il test è stato rilevato un valore
d’impedenza superiore del 30% di quello
acquisito durante l’installazione.
The LED is ON (steady)
During the test, an impedance value
30% higher than the one acquired during
installation one is detected.
GND
Il led lampeggia
Indica che c’è una mancanza di isolamento
tra la linea degli altoparlanti e la terra.
The LED is flashing
This indicates a lack of insulation between
the loudspeakers line and earth.
AMP
Il led si accende
Indica un guasto dell’amplificatore.
The LED lights up
This indicates a failure of the amplifier.
Si tenga in ogni caso presente che in assenza di
guasti, i led sul pannello frontale dell’amplificatore
fungono da VU-METER.
Qualora vi sia almeno un guasto, la funzione
VU-METER viene abbandonata e i led indicheranno
il guasto rilevato.
It must in any case be kept in mind that in the
absence of failures, the LED’s on the front panel of
the amplifier act as VU-METERs.
If there is at least one failure, the VU-METER
function is quit, and the LED’s will indicate the
failure that has been detected.