PS-3220
Set-up
5
013-16067A
•
The Graph display shows “Temperature (°C)” as the measurement on the vertical axis. The “Hardware Setup”
icon is in the lower right-hand corner.
Collect Data
1.
Click or touch the “Start” button to begin collecting data. Watch the Graph display to see the data as it is
recorded.
Connect the Sensor in PASCO Capstone
1.
Turn on the sensor and start the software. In
PASCO Capstone, click or touch the “Hardware
Setup” icon in the Tools palette to open the Hard-
ware Setup panel.
•
The Hardware Setup panel confirms that the
software is “Searching for wireless devices”. The
panel shows the “Available Wireless Devices”.
2.
Touch or click the desired sensor in the Hardware
Setup panel that matches the XXX-XXX Device ID
number on the sensor.
Hardware
Setup Icon
Click or Touch to
select a sensor
