PS-3220
Appendix B: Calibration
11
013-16067A
3.
In the “Sensor Data Configuration” screen, touch or click the “Graph” in the Templates” part of the screen to
open a graph display.
4.
Below the Graph, touch or click the “Hardware Setup icon” to open the “Calibrate Sensor: Select
Measurement” window.
•
In this window, the sensor, measurement, and calibration type are already selected.
5.
Click or touch “Continue” to open the “Calibrate Sensor: Enter Values” window.
6.
Put the thermometer into the ice-water bath. Also put the end of the Fast Response Temperature Probe in the
ice-water bath. When the “Sensor Value” stabilizes, click or touch the Set Calibration “button.
Hardware Setup icon
Touch or
Click
Click or Touch
Continue
