Partner PT-5700, User Manual

Page: 27 / 60

17
C
HAPTER
3
BIOS S
ETUP
U
TILITY
The BIOS (Basic Input and Output System) Setup Utility displays the system's configuration status and provides
options to set system parameters. The parameters are stored in battery-backed-up CMOS RAM that saves this informa-
tion even when the power is turned off. When the system is turned back on, the system is configured with the values
found in CMOS.The following topics are described in this chapter.
• “About the Setup Utility”
• “Entering the Setup Utility” on page 18
• “Standard CMOS features” on page 19
• “Advanced BIOS Features ” on page 21
• “Integrated Peripherals ” on page 29
• “Power Management Setup Option” on page 34
• “PnP/PCI Configurations” on page 38
• “PC Health Status” on page 40
• “Frequency/Voltage Control” on page 41
• “Other BIOS Options” on page 42
About the Setup Utility
The BIOS Setup Utility enables you to configure the following items:
• Hard drives, diskette drives, and peripherals
• Video display type and display options
• Password protection from unauthorized use
• Power management features
This Setup Utility should be used for the following:
• When changing the system configuration
• When a configuration error is detected and you are prompted to make changes to the Setup Utility
• When trying to resolve IRQ conflicts
• When making changes to the Power Management configuration
• When changing the User or Supervisor password
TIP
If you have made settings that you do not want to save, use the "Exit Without
Saving" item and press Y to discard any changes you have made.