Partner Tech International PT-5700, Service Manual, Page: 19 / 88

Advanced BIOS Features 11
Access Mode
This item defines special ways that can be used to access IDE hard disks such as LBA (Large Block Addressing).
Leave this value at
Auto and the system will automatically decide the fastest way to access the hard disk drive.
Press <Esc > to close the IDE device sub-menu and return to the Standard CMOS Features menu.
Video
This item defines the video mode of the system. This mainboard has a built-in VGA graphics system; you must leave
this item at the default setting.
Halt On
This item defines the operation of the system POST (Power On Self Test) routine. You can use this item to select which
types of errors in the POST are sufficient to halt the system.
Base Memory, Extended Memory, and Total Memory
These items are automatically detected by the system at start up time. These are display-only fields. You cannot make
changes to these fields.
• Base Memory – This field displays the amount of conventional memory detected by the system during boot.
• Extended Memory – This field displays the amount of extended memory detected by the system during boot.
• Total Memory – This field displays the total amount of memory (Base and Extended) detected by the system
during boot.
Press <Esc> to return to the main menu.
Advanced BIOS Features
Selecting Advanced BIOS Features on the main menu displays this menu: