Communications Setup Screens (Comm Setup)
Communications Setup Screens (Comm Setup)
LASAIR II Operator’s Manual
LASAIR II Operator’s Manual
Page
Page
5-23
5-23
Network Parameters
Network Parameters
Net Addr
Net Addr
Sets the IP address of this unique LASAIR II in a decimal notation
Sets the IP address of this unique LASAIR II in a decimal notation
form of aaa.bbb.ccc.ddd. Each 3-numeric series represents a value from 0–255
form of aaa.bbb.ccc.ddd. Each 3-numeric series represents a value from 0–255,,
separated by period characters (.). This address is unique to
separated by period characters (.). This address is unique to the hardware it
the hardware it
serves. A valid IP address would look like: “010.255.000.099”. The non-
serves. A valid IP address would look like: “010.255.000.099”. The non-
significant zeros can be dropped so that
significant zeros can be dropped so that the same address appears as
the same address appears as
10.225.0.99.
10.225.0.99.
Mask
Mask
Sets the net mask address using a
Sets the net mask address using a decimal notation form of
decimal notation form of
aaa.bbb.ccc.ddd. Each 3-numeric series represents a value from 0–255,
aaa.bbb.ccc.ddd. Each 3-numeric series represents a value from 0–255,
separated by period characters “.”. The mask separates the network address
separated by period characters “.”. The mask separates the network address
from the host address. Usually, the mask will be similar to “255.255.255.0”.
from the host address. Usually, the mask will be similar to “255.255.255.0”.
Y
Your network administrator will tell y
our network administrator will tell you if you
ou if you need to enter
need to enter this field.
this field.
Gateway
Gateway
Used when communicating across networks. The gateway address
Used when communicating across networks. The gateway address
is a decimal notation form of nnn.nnn.nnn.nnn. Each 3-numeric series
is a decimal notation form of nnn.nnn.nnn.nnn. Each 3-numeric series
represents a value of 0–255, separated by p
represents a value of 0–255, separated by period characters “.”. An example of
eriod characters “.”. An example of
a valid gateway address is: “10.255.0.60”.
a valid gateway address is: “10.255.0.60”.
Multicast
Multicast
Required when using Pharmaceutical Net or Facility Net software.
Required when using Pharmaceutical Net or Facility Net software.
The multicast address in a decimal notation form of aaa.bbb.ccc.ddd. Each
The multicast address in a decimal notation form of aaa.bbb.ccc.ddd. Each
3-numeric series represents a value from 0
3-numeric series represents a value from 0
–
–
255, separated by period characters
255, separated by period characters
(.). An example of a valid multicast address is: 224.10
(.). An example of a valid multicast address is: 224.100.100.1.
0.100.1.
Enable Web Server
Enable Web Server
The default setting is Enabled; note the check mark in
The default setting is Enabled; note the check mark in
the box. It allows a user to connect to the LASAIR II from a computer.
the box. It allows a user to connect to the LASAIR II from a computer.
Disabling this function prevents remote control and viewing of sampling.
Disabling this function prevents remote control and viewing of sampling.
Enable TCP/IP
Enable TCP/IP
The default setting for this field is Enable; note the check
The default setting for this field is Enable; note the check
mark in the box. It allows a u
mark in the box. It allows a user to connect to Facility/Pharmaceutical Net.
ser to connect to Facility/Pharmaceutical Net.
Disabling this function prevents the use of these applications.
Disabling this function prevents the use of these applications.
TCP/IP Remote Mode
TCP/IP Remote Mode
The default setting is “disabled”. Checking this box
The default setting is “disabled”. Checking this box
enables Facility Net to download data
enables Facility Net to download data stored in the LASAIR II rather than
stored in the LASAIR II rather than
sampling data collected on-line. See “Preparing
sampling data collected on-line. See “Preparing LASAIR II for use in Remote
LASAIR II for use in Remote
Mode” on page
Mode” on page 7-7 for additi
7-7 for additional details. “Enable
onal details. “Enable TCP/IP” must als
TCP/IP” must also be
o be
checked to enable this function.
checked to enable this function.
NOTE:
NOTE:
Before editing this screen we recommend that you record and save the
Before editing this screen we recommend that you record and save the
initial values as received
initial values as received from the factory.
from the factory.
Comm Setup - Serial Screen
Comm Setup - Serial Screen
To open the Comm Setup - Serial Screen:
To open the Comm Setup - Serial Screen:
From any screen under Comm Setup, press the
From any screen under Comm Setup, press the
Screen Select
Screen Select
softkey.
softkey.
