Installing the LASAIR II
Installing the LASAIR II
LASAIR II Operator’s Manual
LASAIR II Operator’s Manual
Page
Page
2-7
2-7
To secure the sample probe to a tripod:
To secure the sample probe to a tripod:
1
1
Fit the screw on the tripod plate into the
Fit the screw on the tripod plate into the threaded hole on the tripod
threaded hole on the tripod adapter.
adapter.
2
2
Make the screw secure but hand tight only.
Make the screw secure but hand tight only.
3
3
Position the tripod where you wish to sample.
Position the tripod where you wish to sample.
Figure 2-6: 350L and 550L Tubing and Fittings Assembled
Figure 2-6: 350L and 550L Tubing and Fittings Assembled
Barbed
Barbed Adapter
Adapter,,
1000008910
1000008910
Tubing-to-Monitor
Tubing-to-Monitor
