Particle Measuring Systems LASAIR II 310, Operator'S Manual

Page: 183 / 231

Page Page G-2 G-2 LASAIR LASAIR II II Operator’s Operator’s Manual Manual
Appendix G: LASAIR II Native Serial Communications Appendix G: LASAIR II Native Serial Communications
Error Error
A command failed due to other circumstances. The A command failed due to other circumstances. The most likely cause most likely cause
is that the serial interface did not execute the “ is that the serial interface did not execute the “
KB 1 KB 1
” command to lock-out ” command to lock-out
keyboard control, and someone is using the front panel controls. This message keyboard control, and someone is using the front panel controls. This message
can also be caused by a parameter out of range.
can also be caused by a parameter out of range.
Error --Range Error --Range
The following commands have a parameter out-of- range: The following commands have a parameter out-of- range:
••
TN TN
•• ANID ANID
••
AUTOSTART AUTOSTART
••
C 10 C 10
LASAIR Upgrade Information LASAIR Upgrade Information
The original LASAIR had a somewhat The original LASAIR had a somewhat terse interface, hence users who want terse interface, hence users who want to to
upgrade their own software must handle the fundamental interface changes. The upgrade their own software must handle the fundamental interface changes. The
following is a quick list of supported commands from the LASAIR, with notes
following is a quick list of supported commands from the LASAIR, with notes
about any differences.
about any differences.
The following command is not supported: The following command is not supported:
R R
Retransmit Retransmit sample sample in in last last group. group.
Commands Supported from the LASAIR Commands Supported from the LASAIR
SS SS
Start Sampling Start Sampling
ES ES
End Sampling End Sampling
SN SN
Set to continuous sampling Set to continuous sampling
C C
Change/setup command (see additional information below). Change/setup command (see additional information below).
KB KB
Keyboard lockout command. This is retained through a Keyboard lockout command. This is retained through a
power cycle. power cycle.
KG KG
Keyboard lockout until power cycle. Keyboard lockout until power cycle.
TI TI Set sample interval Set sample interval
TD TD
Set time/date Set time/date
ID ID
Set instrument ID. Set instrument ID.