PAR POS Installation Manual for TACO DEL MAR
Page
6
Figure 2: Removing the POS from the box
Chapter 2:
Installing the PAR
ES7700® POS System
Topics covered in this chapter:
Setting up your ES7700 POS terminal and peripherals (receipt printer, cash drawer, keyboard, mouse,
UPS, and router). The typical store configuration will consist of one terminal called Station 1. If the
store has a drive-thru then there may be 2 terminals, and the second terminal will be called Station 2.
Overview
The procedures in this chapter outline how to install your ES7700 POS terminal and peripherals.
1.
Verify receipt and condition of all boxes and components. Verify physical site and power
availability is adequate.
2.
Verify the product numbers match the shipping list. If it is not a match, or if any items are
missing or damaged, contact PAR Order Administration at 1-800-448-6505.
Prepare POS Terminal for Setup
Remove POS from Box
3.
The POS terminal is located in Box 1. Open the box and remove the
Styrofoam end cap, shown in Figure 1.
Figure 1: Removing end cap
4.
Put your left hand on the left side of the top and
tilt it to the right, shown in Figure 2.
DO NOT
pull the POS terminal out of the box by
lifting on the antistatic bag. This may result in
damage to the terminal.
5.
Firmly grasp the POS on both sides and then lift
upward, shown in Figure 2.
