Parrot ANAFI USA, User Manual

Page: 4 / 106

4
P
REREQUISITES
You want
ANAFI USA
up in the air as soon as possible, so do we.
1. Wake your
ANAFI USA
’s smart battery up. Charge the battery using one of the enclosed
USB-A to USB-C cable and the enclosed charger. The battery’s LEDs start flashing: it is
awake. Let it charge while you read. Parrot recommends you always run a full charge of
your smart battery before flying
ANAFI USA
.
2. Press the power button of the Parrot Skycontroller USA for three seconds to power it on.
Do not hesitate in recharging it, connecting its USB-C port to a power source, for the
update of the device:
ANAFI USA
’s controller is also a powerful Android tablet, dedicated
to your aerial missions – or those of your team.
Thus, like with any other tablet, you can adapt the brightness of your screen to your
flight conditions.
Parrot Skycontroller USA: bottom panel
Under the
watertight cover:
Reset USB-A RJ45 USB-C Power
3. We recommend you connect your Parrot Skycontroller USA to a network (by Wi-Fi or
through a RJ45 cable) to carry out the required updates (operating system, Android
applications, etc.) and to begin personalizing it.
4. FreeFlight 6,
ANAFI USA
’s piloting software, is preinstalled on the Parrot
Skycontroller USA.
5. Touch this logo on the screen of your Parrot Skycontroller USA to launch FreeFlight 6.
The interface displays the homepage of FreeFlight 6.
Refer to the “
Presentation of Parrot Skycontroller USA” section of this guide additional information.