Parrot ANAFI USA, User Manual

Page: 37 / 106

User Guide v6.7.7GOV – © Parrot, April 29, 2022 37
S
MART
L
I
P
O
B
ATTERY
ANAFI USA
’s smart LiPo battery is preinstalled on the drone and should always be
reinstalled in the same way, with the LEDs and power button facing up, to avoid
irrecoverable electric damage to the battery, to the drone, or to both.
The smart battery can be charged whether it is installed on
ANAFI USA,
or not. When
handling
ANAFI USA
, you should never apply pressure and generally avoid touching the
drone’s gimbal – its most sensitive part. The following directions will help you handle your
drone and battery safely.
Battery removal
To remove the smart battery from the drone, unfold the back arms of
ANAFI USA
. Set
the drone on a flat and even surface (such as a table), and press the push-button
which connects the battery to the body of the drone with your thumb. Gently slide
your thumb and the battery toward the back of
ANAFI USA
. When the hook of the
push-button is disengaged from the body of the drone, lift the battery away from
ANAFI USA
.
Battery installation
To install the smart battery back on the drone, unfold the back arms of
ANAFI USA
.
Set the drone on a flat and even surface (such as a table), and position the battery’s
three hooks into the drone’s corresponding slots. Place your middle finger on the
Parrot logo of
ANAFI USA
and your thumb on the back of the smart battery. Squeeze
your fingers together until you feel and hear the battery clicking into the body of the
drone. You are set!
Battery charging
To charge
ANAFI USA
’s smart LiPo battery, use the enclosed USB-A to USB-C cable to
plug the battery to a power source. This convenient cable enables you to charge your
battery from:
o
the enclosed charger;
o
a tabletop or laptop computer’s USB-A port;
o
a power bank’s USB-A port.
Indicative full charging times depending on power sources are as follows (at 20°C):
-
enclosed charger: between 200 and 240 minutes;
-
a computer’s or power bank’s USB-A port: between 300 and 350 minutes.
ANAFI USA
’s smart battery can also be recharged through a Power Delivery adapter or
charger (USB-PD standard), using a USB-C to USB-C cable (not included in the box). In that
configuration, full charging time of the battery can be reduced to 115 minutes.