Parkside PWSAM 20-Li A1, Translation Of The Original Instructions

Page: 41 / 178

GB
41
Inserting the battery
1. Push the battery (9) along the guide in-
to the battery holder (11).
You will hear the battery click into
place.
Removing the battery
1. Press and hold the battery release (10)
on the battery (9).
2. Pull the battery out of the battery hold-
er (11).
Adjusting the guard cover
1. Remove the battery (9).
2. Hold the unit by the handle (6) with
one hand while turning the guard cov-
er (18) to the working position with the
other.
Adjust the guard cover (18) so that
any sparks or detached parts cannot
hit either the user or any bystanders.
Position the guard cover (18) so that
the sparks do not ignite any combust-
ible parts, including those in the sur-
roundings.
Switching on and off
Switching on
1.
DANGER!
Risk of injury! The
device must only be operated with the
guard cover (18) fitted.
Adjust the guard cover (18) so that
any sparks or detached parts cannot
hit either the user or any bystanders.
2. Press the on/off switch (5) down and
slide the on/off switch (5) forward.
3. Lock the on/off switch (5): Tilt the on/
off switch (5) upwards.
4. Check that the attachment tool is run-
ning smoothly. If not: Replace the at-
tachment tool.
5. Wait until the device has reached full
rotational speed.
Due to the intelligent energy manage-
ment system, the motor starts after a
delay (soft start/Softstart).
6. Guide the attachment tool against the
workpiece.
Switching off
1. Remove the attachment tool from the
workpiece.
2. Slide the on/off switch (5) to the rear.
3. Wait until the power tool has stopped
before placing it down.
4. Remove the rechargeable battery (9)
from the device if you are leaving the
device unattended or if you have fin-
ished working.
Transport
Information on transporting the device:
• Switch off the device and remove the
rechargeable battery. Make sure that
all moving parts have come to a com-
plete stop.
• Remove the attachment tool.
• Always carry the device by the handle
(6).
Cleaning, maintenance
and storage
WARNING!
Risk of injury due to un-
intentional start-up. Protect yourself when
performing maintenance or cleaning work.
Switch off the device and remove the bat-
tery (9).
You should have any repair and mainten-
ance work that is not described in these
instructions carried out by our Service
Centre. Only use original replacement
parts.