background image

PBK 4 A1

 

2 

GB

IE

NI

4-IN-1 PETROL MULTI-TOOL PBK 4 A1

Introduction

Congratulations on the purchase of your new appliance. You have chosen 
a high-quality product. The operating instructions are a part of this product. 
They contain important information about safety, usage and disposal. 
Before using the product, please familiarise yourself with all operating and 
safety instructions. Use the product only as described and for the range of 
applications specified. Please also pass these operating instructions on to 
any future owner.

Intended use

Long-handled hedge trimmer

This appliance is intended for the cutting and trimming of hedges, bushes 
and flowering shrubs in the home environment. This is a hand-held appliance 
with an integrated engine unit with linear reciprocating cutting blades.

  

WARNING!

 

Hedge trimmers are not suitable for use by children.

Pole pruner

This appliance is intended for trimming branches in trees.

3-section cutting blade/strimmer

Use with the 3-section cutting blade: for cutting high grass, undergrowth 
and light scrub.

Use with strimmer: for cutting grass and small weeds.

Extension attachment

 

CAUTION!

 

Do not use the extension attachment/boom 

 in combination with 

the 3-section cutting blade/strimmer attachment!

Any other use that is not expressly permitted in these operating instructions 
may damage the appliance and represents a serious risk for the user. 
Please make sure that you pay attention to the restrictions in the safety 
instructions. Comply with all national regulations which may restrict the 
use of the machine. Any other uses of or modification to the appliance is 
deemed to be improper and carries the risk of serious personal injury.  
Not intended for commercial use.

PROHIBITED APPLICATIONS!  
Due to the physical risk posed to the user, the appliance may not be used 
to perform the following activities: cleaning footpaths and as a shredder 
for shredding tree and hedge sections. Furthermore, the appliance may not 
be used to level ground elevations such as molehills. For safety reasons, 
the appliance may not be used as a drive unit for any other devices. The 
user, not the manufacturer, is liable for any resulting damage or injuries of 
any kind.

Features

Engine unit PBK 4 A1-1

  Safety lock-out
  On/Off switch
   Carrying lug
  4 x mounting bolts
  Round handle

5a

  Rubber ring

5

b

  Pin
  Barrier bar
  Screw grip
  Boom
  Throttle control
  Spark plug connector
  Choke lever
  Starter pull cord
  Fuel tank
  Filler cap
  Fuel pump (primer)
  Air filter housing cover

Hedge trimmer attachment PBK 4 A1-3

  Handle
  Lock/release
  Gear housing
  Cutter bar
  Base plate (hedge trimmer)
  Control lever
  Front boom (hedge trimmer)
  Locking pin
  Drive shaft

Pole pruner attachment PBK 4 A1-4

  Front boom (pole pruner)
  Safety ring
  Oil filler cap
  Oil tank
  Blade
  Saw chain
  Bench grinder support
  Stop
  Locking pin
  Drive shaft
  Nut
  Thread
  Sprocket cover
  Blade guide
  Blade hole
  Guide rail
  Oil dispenser
  Chain sprocket
  Oil adjusting screw
   Chain tensioner pin
   Chain tensioner screw

Summary of Contents for 331365_1907











































Reviews: