manualshive.com logo in svg

Parker ViX250IM, User Manual

Share
Download
Parker ViX250IM User Manual Download Page 139

6.  COMMAND REFERENCE

131

G

Go

Syntax

Units

Range of ‘n’

Default

See also

aG

-

-

-

PS S K M

Description

Issuing a G command starts motion using the parameters specified by the V,
A or AA/AD, and D commands or via the PROFILE and USE commands.
The mode of motion must have been previously set as this determines which
parameters are used and which are ignored.  For example, mode continuous
will ignore the distance parameter.

Properties

Immediate or buffered, can be used in labelled block, not saved by SV

Example

1PROFILE3(150,200,1500,25)

;define profile 3

1USE(3)

;use profile 3

1G

;perform profile 3

Note

If no motion occurs after G is issued, the cause can be determined by using
the R(UF) command.  Refer to the section on system parameters for more
information.

Summary of Contents for ViX250IM





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands