Parker Hannifin Corporation
Hose Products Division
Wickliffe, OH
2
Crimping Machine
PHastkrimp
Bulletin 4480-T15-US
•
Read the entire Technical Manual prior to mounting and operating this crimper.
•
View the enclosed video prior to operating this crimper
WARNING — When using this machine, always exercise basic safety precautions, including
the following:
1. Use this machine only for its intended purpose: to fabricate Parker hose assemblies.
2. Parker Hannifin will not accept responsibility for any incidental, consequential or spe-
cial damages of any kind or nature whatsoever that result from any subsequent alter-
ations to any Parkrimp machine. Parker Hannifin disclaims any warranties on items
altered after leaving the Parker Hannifin facility.
3. This machine must be properly installed and located in accordance with the installation
instructions before it is used.
To minimize the possibility of injury:
1. The power unit must be connected to a grounded properly rated, protected and sized
power-supply circuit to prevent electrical shock and to avoid electrical overload;
2. DO NOT OPERATE OVER MAXIMUM RATED WORKING PRESSURE; AND
3. CHECK FOR SAFE SYSTEM SETUPS.
Make sure that the valve, connecting hoses, etc. are protected from any external source
of damage, such as: excessive heat, flame, moving machine parts, sharp edges, falling
objects, corrosive chemicals, etc.
∆
©
©
©
©
©
Copyright 2005, Parker Hannifin Corporation, All Rights Reserved
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are
governed by the provisions stated in the "Offer of Sale".
Offer of Sale
Parker Safety Guide for Selecting and Using Hose, Tubing, Fittings and Related Accessories
Parker Publication No. 4400-B.1
Revised: May, 2002
WARNING:
Failure or improper selection or improper use of hose, tubing, fittings, assemblies or related accessories (“Products”) can cause death, personal injury and
property damage. Possible consequences of failure or improper selection or improper use of these Products include but are not limited to:
•
Fittings thrown off at high speed.
•
High velocity fluid discharge.
•
Explosion or burning of the conveyed fluid.
•
Electrocution from high voltage electric powerlines.
•
Contact with suddenly moving or falling objects that are controlled by the conveyed fluid.
•
Injections by high-pressure fluid discharge.
Before selecting or using any of these Products, it is important that you read and follow the instructions below. Only Hose from Parker’s Stratoflex Products Division is approved for in flight
aerospace applications, and no other Hose can be used for such in flight applications.
•
Dangerously whipping Hose.
•
Contact with conveyed fluids that may be hot, cold, toxic or otherwise injurious.
•
Sparking or explosion caused by static electricity buildup or other sources of electricity.
•
Sparking or explosion while spraying paint or flammable liquids.
•
Injuries resulting from inhalation, ingestion or exposure to fluids.
!
www.comoso.com
