background image

Parker Hannifin Corporation
Hose Products Division
Wickliffe, OH

3

Crimping Machine
PHastkrimp

Bulletin 4480-T15-US

Table of Contents

Specifications ........................................................................................................ 4

Installation & Operating Instructions ....................................................................... 5

Electrical Requirements - 3 Phase .......................................................................... 6

1 Phase .......................................................................... 7

Safety Notice ......................................................................................................... 7

Operation and Crimping ......................................................................................... 8

Tool Selection Chart ............................................................................................... 9

Crimping Instructions — 26, 43, 70, 71, 73, 78 and 81 Series ............................... 10

Assembly Details and Parts Lists - Crimper ..................................................... 11-15

Troubleshooting Guide .................................................................................... 16-17

Maintenance ........................................................................................................ 18

Safety Guide (Parker Publication 4400-B.1) ..................................................... 19-22

Offer of Sale ........................................................................................................ 23

Help us help you ...

Read this guide carefully.

It is designed to help you operate and maintain your PHastkrimp. If you don’t understand something or need
more help, call:

Technical Service Department
Parker Hannifin Corporation
Hose Products Division
Phone: (440) 943-5700
Fax:     (440) 943-3129

or write:
Parker Hannifin Corporation
Hose Products Division
30240 Lakeland Blvd.
Wickliffe, OH 44092

Write down the Model and Serial Numbers:

___________________________________

  Model Number

___________________________________

  Serial Number

Use these numbers in any correspondence or service calls.

RECEIVING INSTRUCTIONS: UNPACKING – Remove all documents and components from shipping containers.

INSPECTION – Visually inspect all components for shipping damage. If any shipping damage is found, notify the
carrier at once. Shipping damage is not covered by the Parker warranty. The carrier is responsible for all repair and
replacement costs resulting from such damage.

www.comoso.com

Summary of Contents for PHastkrimp

























Reviews: