34
Figure 53
Selecting the Correct Pump for the Tri-Tool
®
There is only one pump for installing Phastite
®
connectors
with the Tri-Tool
®
, this is the Mains Operated Pump (MP).
Mains Pump Setup
1. With the pump on a flat and stable work surface,
Connect the hose to the pump’s hydraulic outlet using
the quick connect (Figure 50).
2. Connect the downstream side of the hose to the tool’s
hydraulic inlet using the quick connect.
NOTE:
Ensure
that the quick links provided are fastened between the
hose containment hoops and mounting bracket (there
are 2 quick links for each end of the hose) (Figure 51).
3. Check all system fittings, hose and connections to be
sure they are tight and free from damage and leaks.
4. Loosen the oil fill cap by 1 - 2 turns, to allow the pump
to vent when in operation (Figure 52).
5. Link the digital touch screen controller to the pump via
the connecting lead (Figure 53).
Electric Hydraulic Pump (MP)
Part Number:
PH-16-MP
Weight:
27 lbs (12 Kg)
Reference Manual
Document Number L2062 Rev. G
Figure 51
Figure 50
Figure 52
Summary of Contents for Phastite PH-10-4N-TMS
Page 1: ...Phastite Tube Connectors Installation Manual BULLETIN 5909...
Page 33: ...41 42 Notes Notes...
Page 34: ......
