background image

40

39

Heat Code Traceability (HCT)

Appendix 1

HCT refers to the fact that a specific part can be traced back 
to the original mill heat of metal from which it was made. 
Beginning with the original melt, a package of documents 
is created which completely describes the metal in physical 
and chemical terms. The end result is that a number, which 
is permanently stamped to the part, refers back to the 
document package. HCT offers these advantages:

  Raw materials for manufacture must meet code 

requirements. This can be verified through documentation 
so that the customer is certain that what is ordered is 
received.

  HCT provides a record of chemical analysis with the raw 

material.

  HCT relieves the user of Parker instrumentation fittings 

of any doubts. It acts as an assurance for today and for 
tomorrow.

In addition to the documentation of chemical and physical 
properties, great care is taken throughout the manufacture 
of Parker’s connectors to ensure that potential stress 
corrosion will not be a problem in normal usage of the 
parts. Manufacturing processes avoid exposure of the parts 
to mercury or halogens, and control of thermal treatment 
avoids the condition known as continuous grain boundary 
carbide precipitation.

Figure 65

The following identification information is on the body and 
collar of every Phastite

®

 connector:

 Part number

 HCT Number

 Raw Material

 OD size of tubing

 Trademark

HCT Number

Summary of Contents for Phastite PH-10-4N-TMS




































Reviews: