Parker PDHX-E Series, User Manual

Page: 35 / 103

6. Define appropriate outputs for TM8 operation using the OUTnJ command.
The TM8 is now ready for operation.
Example
The TM8 is wired as shown in Figure 3-9.
Inputs 6 to 9 are to be used as data inputs.
Input 10 is to be used as a sign input.
Outputs 3 to 5 are to be used as strobe outputs.
Set up as follows:
1. Set 1OCON 000000 all NPN outputs
2. Set 1ICON 00000100 bank 3 selected as pull-up
3. Set 1IN6N Input 6 is defined as data input.
1IN7N Input 7 is defined as data input.
1IN8N Input 8 is defined as data input.
1IN9N Input 9 is defined as data input.
1IN10W Input 10 is defined as sign bit.
4. Set 1OUT3J Output 3 is defined as data strobe.
1OUT4J Output 4 is defined as data strobe.
1OUT5J Output 5 is defined as data strobe.
The thumbwheel is now ready for use. Set the thumbwheel to the desired value and enter
the information using one of the data entry commands.
For example set the thumbwheel to +12345678
Command Description
1DRD Request distance data from all TM8 digits
1D Display the distance read (D+12345678) If you do not receive this
response, return to step
1 and retry
For further information relating to Data entry commands refer to the software section.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com