9
Parker Hannifin Corporation
Tube Fittings Division
Columbus, Ohio
http://www.parker.com/tfd
Parflange ECO 25
Hydraulic Flanging and Flaring Tool
Components Required
• Dual-Function Flare/Flange Die Set (contains tooling for both
Flanging and Flaring)
See chart page 7
• Flanging Pin specific to Tube O.D., Wall Thickness, and Tube
Material
See chart page 7
• LB-2000 Lubricant for steel
• Pro Form 858 Lubricant for stainless steel
(Contact TFD for more information)
90
˚
Flanging Information for Seal-Lok Fittings
LB-2000 Lubricant
ECO 25 Operating Instructions for 90
˚
Flanging
for Seal-Lok FIttings
Step 1: Measure the tube O.D. and wall thickness for proper
die and pin selection.
Dual Function Die Set
Step 2: Select the die set and flanging pin matching the tube
O.D., wall thickness and material of your tube from the
charts on page 7. The die set is stamped with the tube
O.D. and the pin is stamped with both the tube O.D.
and wall thickness (and material if flanging stainless
steel tube).
Step 3: Open the swing arm to expose die cavity and main
spindle head.
Flanging Pin
