5 - PVD 3661 MGV_ Commisionning Manual_March 2012.Docx
1. INTRODUCTION
1.1. Purpose and intended audience
This manual contains information that must be observed to install, operate and maintain PARKER MGV high speed
motors.
Installation, operation and maintenance of the equipment should be carried out by qualified personnel. A qualified
person is someone who is technically competent and familiar with all safety information and established safety
practices; with the installation process, operation and maintenance of this equipment; and with all the hazards
involved.
Reading and understanding the information described in this document is mandatory before carrying out any
operation on the motors. If any malfunction or technical problem occurs, that has not been dealt with in this manual,
please contact PARKER for technical assistance. In case of missing information or doubts regarding the installation
procedures, safety instructions or any other issue tackled in this manual, please contact PARKER as well.
PARKER’s responsibility is limited to its torque motors and does not encompass the whole user’s system. Data
provided in this manual are for product description only and may not be guaranteed, unless expressly mentioned in
a contract.
DANGER:
PARKER declines responsibility for any industrial accident or material damage
that may arise, if the procedures and safety instructions described in this manual are not
scrupulously followed.
1.2. Safety
1.2.1.
To operate safely, this equipment must be transported, stored, handled, installed and serviced correctly. Following
the safety instructions described in each section of this document is mandatory. Torque Motors usage must also
comply with all applicable standards, national directives and factory instructions in force.
Principle
DANGER:
1.2.2.
Non-compliance with safety instructions, legal and technical regulations in force
may lead to physical injuries or death, as well as damages to the property and the
environment.
General Safety Rules
Generality
DANGER:
The qualified personnel must know the safety (C18510 authorization, standard VDE 0105 or
IEC 0364) and local regulations.
The installation, commission and operation must be performed by qualified
personnel, in conjunction with this documentation.
They must be authorized to install, commission and operate in accordance with established
practices and standards.
