Parker HLR070, Mounting Instructions

Page: 8 / 56

Introduction HLR Mounting Instruction
8
192-510201N1 HLR 2019-04
1.5 For Safety Use
1.5.1. General hazards
General Hazards on Non-Compliance with the Safety Instructions
The subsystem has been designed in accordance with state-of-the-art technical
developments and is operationally reliable. If it is not operated by qualified or at
least trained personnel or if it is operated improperly or not in accordance with the
operating instructions, however, the unit may bear the risk of hazards.
Electronic, moving and rotating components can

cause danger for life and limb of the operator or third persons and / or

cause material damage
.
If the linear actuator is installed in a machine plant, the safety requirements noted
in the operating instructions for that machine must be combined with those
described in this manual.
1.5.2. Identifying Residual Dangers and Hazardous Areas
If there are still residual dangers present to persons or property from the linear
actuator in spite of operating it in a safe manner, the user must make reference to
these residual dangers through signs and written rules requiring appropriate
procedures.
The following safety signal words are used:
Indicates that an imminent hazardous situation may lead to death or serious
bodily harm if not prevented using appropriate safety measures.
Indicates a potentially hazardous situation which, if not avoided using appropriate
safety measures, could result in serious or minor injury.
Indicates a potentially hazardous situation which, if not avoided using appropriate
safety measures, may result in minor injury or material damage.
Provides important information about the product, how to handle the product or
about the part of the manual to which particular attention must be paid.
1.5.3. Working safely
The information (such as instructions and notes) contained in this manual must
be heeded for all work involved in installing, commissioning, setting up, operating,
changing operating conditions and modes, servicing, inspecting and repairing the
unit.
The manual must be available close to the linear module during the performance
of all tasks.
It is impermissible to operate the liner module if it is not in perfectly functional
condition.
Operating personnel
Only qualified expert personnel is permitted to perform works on the linear
actuator. All the applicable regulations and provisions must be heeded (IEC, EN,
national accident prevention regulations etc.).
Qualified persons as the term is used in this manual are persons who:

persons who, by virtue to their training, experience and instruction, and their
knowledge of pertinent norms, specifications, accident prevention regulations and
operational relationships, have been authorized by the officer responsible for the
safety of the system to perform the required task and in the process are capable
of recognizing potential hazards and avoiding them (definition of skilled persons
in accordance with VDE015 or IEC364)