56
CM2115
Installation
10.2. Electrical Installation Guidelines
Use the following guidelines when installing the CM2115 in a vehicle.
10.2.1. Designing and Connecting the Vehicle Harness
The vehicle manufacturer is responsible for designing a vehicle harness that mates
with the CM2115 connector(s).
The vehicle harness design depends on the following:
How the CM2115's inputs, outputs, communication, and power pins are
configured.
Other components on the vehicle and their physical locations.
The routing of the harness.
Suggested wire sizing for the various connections are as follows:
Inputs, 18 AWG
Outputs, 16 AWG
Logic power and ground, 18 AWG
Other powers and grounds, 16 AWG
Busbar power, if applicable, 14 AWG per 20 A of current (or 8 AWG per 40
A of current for single pin busbar connectors)
Once the vehicle harness is designed, it can be connected to the CM2115 simply
by clicking the mating connector into the connector port on the CM2115.
