User Guide
3
About the CM2115 User Guide
The CM2115 is designed to be used with configuration (stuffing) options, where
specific customer requirements are met by modifying components and component
values on a project by project basis. The manual cannot address all of the
configurations that are possible - but only focuses on the most commonly used
configuration.
The configuration in this manual has 2 CAN busses, 5V sensor supply and no
status LEDs.
This manual describes the hardware components of the CM2115, but does not
explain how to write or configure the software. For more information about
software, refer to the appropriate software manual or contact your Parker Vansco
Account Representative.
2.1. Section Types
There are three kinds of sections in this manual: instruction, information, and
example.
Instruction sections
– The only instruction section in this manual is the
Quick
Start
section, which provides procedures for connecting the CM2115 to a
development system, powering it up, and downloading application software.
Information sections
– Most sections in this manual are informational. They
describe the hardware components of the CM2115, and usually have three
sub-sections: capabilities, configuration options, and installation connections.
Note:
The
configuration options sections
are a reference for what can be
configured for each component of the CM2115. All hardware configuration
must be selected early in the design process of your product, whereas some of
the software configuration options can be implemented at anytime. If you
already have a custom configuration for your product, you can ignore these
sections.
Example sections
– The only example section in this manual is the
Application Examples
section, which provides descriptions, diagrams, and
explanations for possible CM2115 applications.
2. About the CM2115 User Guide
