9
11.11 System Info
System Info: Software version number.
12 FAQ
1) The System Can’t Start up?
Check the power connection. Please follow the steps below to check the power connection:
①
Check the input power: if the power wire is connected correctly, if the ground wire is connected to the
battery, and if the fuse on the power wire is in good condition.
②
Check if the voltage of the ACC signal wire is higher than 6V.
③
Check if the input voltage of the device is higher than the shutdown voltage set on the screen of the
device.
2) The Device Keeps Restarting?
Please follow the steps below to check:
①
Check if the supply voltage of DVR is insufficient. If it is lower than the start-up voltage, the device
would restart repeatedly.
②
Restart the device to see if it will work properly.
3)
Unable to Recognize Disks
？
①
Check if the disk is in good condition and make sure that it is installed with good contact.
②
The disk has been formatted by DVR.
③
Restart the device to see if it will work properly.
