6
"Time Sync" default configuration as shown above.
Time Snyc Setup
:
Go to “System -> Date &Time ->Time Sync->Setup” page.
①
GPS
: Set GPS to ON/OFF.
②
NTP
: Set NTP to ON/OFF.
③
NTP Server
: Show the URL of the NTP Server.
Application scene
usage
GPS:Off and NTP:Off Set the time zone and daylight saving time first, then set the date and time
GPS:On or NTP:On
Time zone and daylight saving time must be set, no need to set date and
time
Note
：
when“Time Sync”->“GPS”or “Time Sync”->“NTP”is ON
，
the time zone and daylight saving time
must be set; if the time zone is not set, GPS and NTP will change the system time to the default East 8
zone time, resulting in abnormal device time.
DST Setup
:
“DST” default configuration as shown above.
Go to “System -> Date &Time -> DST-Setup” page.
①
Enable
: Set DST setting to ON/OFF.
②
Offset
: Adjust the offset after enabling DST.
③
Mode
: Select the mode of DST (setup DST according to week or date).
④
Start
: Set start time of DST.
⑤
End
: Set end time of DST.
