8
Right View
：
Set the visible width on the right side of the surround view.
Front View
：
Set the visible width on the front side of the surround view.
Back View
：
Set the visible width on the rear side of the surround view.
Notice: The parameters on this page will be reset after importing a new calibration file, If there are
custom parameters, they need to be reconfigured.
Automatically calibration instruction:
Prepare a U disk/SD card, computer, PC side debugging program.
Early-stage preparation
Step 1: Put four calibration mats on the four diagonal areas of the vehicle. (as shown in below figure)
Step 2: Ensure that two calibration mats can be completely saw in each camera, as shown in below
figure:
