5
10.8 RTSP Streaming
The default configuration is shown above.
RTSP On.
: Set RTSP on /off.
Mode
: Set MainStream & SubStream on/off.
mode on/off Instructions: Set RTSP On, make sure the streaming device and DVR are under the
same local area network, images can be displayed by using DVR's own hotspot AP. Or turn on
RTSP On, connect the DVR and the device to the same route (Note: 192.168.100.140 is the fixed
IP address of DVR's AP hotspot), open the network stream of the pull-streaming device, enter the
streaming address under the network URL, 4 main-s 4 sub-streams, a total of 8
push-streams the formats are as follows:
main-stream: rtsp://Ip Address/cam1/mainstream
sub-stream: rtsp://Ip Addr/cam1/substream
