9
:
Indicates that the IPC is normal and can be connected to the DVR.
:
Indicates that the IPC has been connected successfully.
: Indicates that the IP format of the IPC is malformed.
Manual add
: If the IP connected to the IPC is not found, you can add the IPC by manually entering the
IP, User Name and Password of the IPC. If the IPC does not have a user name and password, you only
need to enter the IP of the IPC.
Add
: IPC- adding button, after pressing the Add button, the IP of the selected IPC will show that the
connection is successful
Filter
:
Turn on the filter, the screen does not display the IPC that the DVR has successfully connected to
in this interface; turn off the filter, the screen displays all searched IPCs in this interface.
Refresh
: If the IP connected to the IPC is not found in the interface shortly after booting, you can click
this button to refresh the interface.
OK
: Save the configuration and exit the interface.
Cancel
: Do not save the configuration and exit the interface.
After the IPC connection is successful, you can view the IPC channel recording via the following
interface.
When IPC AUTO is the default setting, the restarted DVR automatically switches to the
main and sub-screen eight-split display after 1min once it connected to the IPC channel. If the IPC
channel is not connected, the DVR automatically switches to CH1~CH4 four-division display after 1min;
if you choose other split mode other than AUTO as the Default setting, other split mode will be displayed
after restarting the DVR.
