Paravan WHEELCHAIR Series, Operating Instructions Manual, Page: 89 / 160

Gener
al
Information
Pr
epar
e
Oper
ate
Help
Technology
Loading and transporting the power wheelchair
89
Attaching the DAHL system:
> Position the locking plate 503125 on the bottom of the wheelchair.
The holes for positioning are already provided in the battery box.
> Now, fix the locking plate inside the battery box with the adaptation
set 502064 and screw the five countersunk screws from below with
the DAHL nuts 500759. Adjust the height of the locking rail (1.2).
> Additional spacers (1mm, 2mm, 3mm, 8mm, 10mm) may be
required for this purpose. Fine adjustment is carried out when the
wheelchair is adjusted in the DAHL Docking Station in the vehicle.
Finally, glue the six spacers 502071 to the bottom of the battery
box so that the batteries lie flat and cannot slip when inserted.
If using the power height adjustable Dahl VarioDock, additional
spacers will not be needed for adjusting the height.
> Once you have adjusted the height of the locking rail, screw in the
pan-head screws medium tight with a screw lock.
Fig. 49: Position of the Dahl system
Fig. 50: Attaching the Dahl System