Paravan WHEELCHAIR Series, Operating Instructions Manual, Page: 86 / 160

Gener
al
Information
Pr
epar
e
Oper
ate
Help
Technology
Loading and transporting the power wheelchair
86
An additional wheelchair-specific adaptation kit is required for the
installation of the Dahl locking plate. It contains special nuts and plastic
spacers to be placed inside the battery box.
DAHL Docking Station installation kit locking plate 503125
(PV art. No.: 000043535) and DAHL adaptation set for DAHL
Docking Station 502064 (PV art. No.: 000044508):
① Countersunk screw with Torx TX27 - ISO 14581 M8x35 14.9
(PV art. No.: 000043534)
② Locking plate with screws for Docking Station 10069
(PV art. No.: 000020667)
③ 8 mm intermediate piece for locking plate for 10069 DAHL
(PV art. No.: 000010131)
④ DAHL spacer 502071 (PV art. No.: 000044507)
⑤ DAHL nut 500759 (PV art. No.: 000044506)
To install the Dahl locking plate, use the DAHL Adaptation kit, article
502064
> You need a Torx key TX 27 to install the adapter set. Tighten the Torx
screws with a torque of 16-18 Nm.
Fig. 43: Dahl Adaptionkit for Dahl Docking
Station
Fig. 44: Torx TX 27
①
② ③
④
④
⑤
14.7.2 Attaching the Dahl locking plate to the wheelchair