background image

Gener

al

Information

Pr

epar

e

Oper

ate

Help

Technology

Description/function of the power wheelchair

45 

6.6 

Road-safe in accordance with The Road Traffic Licensing Act (StVZO)

Fig. 9:   Illumination at the front

Fig. 10:   Illumination at the rear

The PR 25 is a road-approved vehicle that includes the following features 

as standard equipment: 

 

>

LED headlights for optimum illumination 

.

 

>

LED direction indicator 

.

 

>

LED rear lights for the best possible visibility 

.

 

>

Identification  by  yellow  reflectors  on  the  side  in  the  middle  of  the 

wheel.

6.6.1 

§ 24 Special means of transportation

 

L

The  Road  Traffic  Licensing  Act  (StVZO)  makes  reference  to 

wheelchairs. In it, it is stated that:

 

>

(1) Push and gripping wheelchairs, sledges, prams, scooters, 

children's bikes and similar means of transportation are not vehicles 

as defined in this Act.

 

>

(2)  Wheelchairs  or  other  wheelchairs  as  defined  in  section  1  may 

be driven in places where there is pedestrian traffic, however only at 

walking speed. 

Summary of Contents for WHEELCHAIR Series

































































































































































Reviews: