Paravan WHEELCHAIR Series Operating Instructions Manual Download

Page: 81 / 160

Gener

Information

epar

Oper

ate

Help

Technology

Loading and transporting the power wheelchair

1. When the vehicle has come to a standstill, remove the seat belt.

2. To unlock it, move the wheelchair forward slightly to release the pressure on the locking pin. Next, press

the red release button on the control panel. The locking pin is triggered/released for approx. 5 seconds,

after which the locking pin is automatically locked/activated again. Do not attempt to reverse out of the

Docking Station before the red LED on the control module, which indicates the unlock position, lights up.

3. Move the wheelchair out of the Docking Station within the 5-second period.

14.6

Unlocking the Docking Station

WARNING

Moving the wheelchair backwards before the red LED lights up

will cause the Docking Station's locking mechanism to lock.

Driving backwards is then impossible. If this happens, repeat

the unlocking procedure described above.

Summary of Contents for WHEELCHAIR Series

































































































































































Search results

Summary of Contents for WHEELCHAIR Series

Reviews:

Related manuals for WHEELCHAIR Series

Brands by name

Popular brands

Paravan WHEELCHAIR Series, Operating Instructions Manual

Search results

Summary of Contents for WHEELCHAIR Series

Reviews:

Related manuals for WHEELCHAIR Series

Brands by name

Popular brands