Gener
al
Information
Pr
epar
e
Oper
ate
Help
Technology
Loading and transporting the power wheelchair
76
14.2
Securing and fastening the power wheelchair
The power wheelchair must be connected or tied to the transport vehicle
with tightening straps, hooks or loops in order to prevent slipping. The
power wheelchair must be fastened in accordance with the guideline
>
DIN 75078 (parts 1 and 2) “Vehicles for the transportation of persons
with reduced mobility”.
The power wheelchair has the following attachment points:
>
At the front, two rigging eyes
>
At the rear, one rigging eye
In combination with the Dahl docking system, the wheelchair was
successfully subjected to a crash test compliant with ISO 7176-19:2008 -
Mobility facilities [Wheelchairs] for use as a seat in motor vehicles.
L
If your vehicle is equipped with a DAHL Docking Station, further
fastening is not necessary.
)
See section “5.4.2. Deliverable accessories”
Fig. 32: Attachment point at the front
Fig. 33: Attachment point at the rear
Summary of Contents for WHEELCHAIR Series
Page 1: ...Operating instructions PR 25 PARAVAN WHEELCHAIR SERIES EN V1 40...
Page 158: ......
Page 159: ......
