Gener
al
Information
Pr
epar
e
Oper
ate
Help
Technology
Annexes and technical documentation
156
23.4
Log of instructions provided upon delivery
Due to the power wheelchair's flexible setting options, the following information should
be observed:
In the event of tilting (optional):
>
It must be ensured that the seat is not tilted too far forwards or backwards, as
otherwise you could slip out of the seat.
>
The tilt function is set to your weight.
>
Tilt the wheelchair first, then set the backrest.
>
Always wear the seatbelt when using the tilt function.
>
When using the tilt function, only half the speed of the selected movement level is
possible.
Seat / backrest in the special orthopaedic seat (optional):
>
The backrest must only be adjusted as far as is necessary, as the motor is not powerful
enough to lift the weight of the driver. Use the tilt function first.
>
When adjusting the backrest and the tilting angle, be aware of attachments (rucksack,
etc.).
Raising system:
>
When raising and lowering the seat, be aware of head and leg space, the footrests
must not be in contact with the floor.
>
When raising the seat, the power wheelchair will only travel at half speed after approx
100 mm.
>
Lowering up to 15 cm
Summary of Contents for WHEELCHAIR Series
Page 1: ...Operating instructions PR 25 PARAVAN WHEELCHAIR SERIES EN V1 40...
Page 158: ......
Page 159: ......